Concrete Pipe Specification
| American Association of State Highway & Transportation Officials AASHTO | |
|---|---|
| AASHTO T280 | Standard Method of Test for Concrete Pipe, Manhole Sections or Tile |
| AASHTO M86 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
| AASHTO M170 | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
| AASHTO M198 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joints Sealants (Deleted 2012 |
| AASHTO M199 | Standard Specification for Precast Reinforced Concrete Manhole Sections |
| AASHTO M206 | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
| AASHTO M207 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
| AASHTO M242 | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
| AASHTO M259 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers |
| AASHTO M262 | Standard Definition of Terms Relating to Concrete Pipe and Related Products |
| AASHTO M273 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings |
| AASHTO M315 | Standard Specification for Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets (Deleted 2012 |
| www.transportation.org | |
| American Railway Engineering and Maintenance-of-Way Association (AREMA) | |
|---|---|
| AREMA Part 10 | Reinforced Concrete Culvert Pipe |
| AREMA Part 16 | Design and Construction of Reinforced Concrete Box Culverts |
| www.arema.org | |
| American Society of Civil Engineers (ASCE) | |
|---|---|
| ASCE 15 | Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD |
| ASCE26 | Standard Practice for Direct Design of Buried Box Sections |
| ASCE 27 | Standard Practice for Direct Design of Precast Concrete Pipe for Jacking in Trenchless Construction |
| ASCE 28 | Standard Practice for Direct Design of Precast Concrete Box Sections for Jacking in Trenchless Construction |
| www.asce.org | |
| American Society of Testing Materials (ASTM) | |
|---|---|
| ASTM C14 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
| ASTM C76 | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
| ASTM C361 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
| ASTM C443 | Standard Specification for Joints for Concrete Pipe and Manholes Using Rubber Gaskets |
| ASTM C478 | Standard Specification for Precast Reinforced Concrete Manhole Sections |
| ASTM C497 | Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile |
| ASTM C506 | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
| ASTM C507 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
| ASTM C655 | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
| ASTM C822 | Standard Terminology Relating to Concrete Pipe and Related Products |
| ASTM C985 | Standard Specification for Nonreinforced Specified Strength Culvert, Storm Drain, and Sewer Pipe |
| ASTM C990 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Pre-formed Flexible Joint Sealants |
| ASTM C1433 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers |
| ASTM C1577 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers According to AASHTO LRFD |
| ASTM C1628 | Standard Specification for Joints for Gravity Flow Sewer Pipe, Using Rubber Gaskets |
| ASTM C1677 | Standard Specification for Joints for Concrete Box, Using Rubber Gaskets |
| www.astm.org | |
| American Waterworks Association (AWWA) | |
|---|---|
| AWWA C302 | Reinforced Concrete Pressure Pipe, Noncylinder Type |
| www.awwa.org | |
| United States Bureau of Reclamation (USBR) | |
|---|---|
| USBR M-1 | Standard Specification for Reinforced Concrete Pressure Pipe |
| www.usbr.gov | |
| Ontario Provincial Standards Specifications | |
|---|---|
| OPSS 407 | Construction Specification for Maintenance Hole, Catch Basin, Ditch Inlet, and Valve Chamber Installation |
| OPSS 410 | Constructions Specification for Pipe Sewer Installation in Open Cut |
| OPSS 415 | Construction Specification for Pipeline and Utility Installation by Tunneling |
| OPSS 416 | Construction Specification for Pipeline and Utility Installation by Jacking and Boring |
| OPSS 421 | Construction Specification for Pipe Culvert Installation in Open Cut |
| OPSS 422 | Construction Specification for Precast Reinforced Concrete Box Culverts and Box Sewers in Open Cut |
| OPSS 1351 | Material Specification for Precast Reinforced Concrete Components for MH, Catch Basins, Ditch Inlets and Valves Chambers |
| OPSS 1820 | Material Specification for Circular and Elliptical Concrete Pipe |
| OPSS 1821 | Material Specification for Precast Reinforced Concrete Box Culvert and Box Sewers |
| CSA Standard | |
|---|---|
| CSA A23.4 | Precast Concrete Materials and Construction |
| CSA A257.0 | Methods for determining physical properties of circular precast concrete pipe, manhole sections, catch basins, and fittings. |
| CSA A257.1 | Non-reinforced circular concrete culvert, storm drain, sewer pipe, and fittings; |
| CSA A257.2 | Reinforced circular concrete culvert, storm drain, sewer pipe, and fittings. There is a clause for jacking |
| CSA A257.3 | Joints for circular concrete sewer and culvert pipe, manhole sections, and fittings using rubber gaskets. |
| CSA A257.4 | Precast reinforced circular concrete manhole sections, catch basins, and fittings |
| CSA S6 | Canadian Highway Bridge Design Code |
| ASTM International | |
|---|---|
| ASCE 15 | Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD |
| ASTM C14 | Concrete Sewer, Storm Drain and Culvert Pipe: Covers non-reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts in sizes from 4 inches through 36 inches in diameter. |
| ASTM C76 | Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe: Covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm waters, and for the construction of culverts. Class I - 60 inches through 144 inches in diameter; Class II, III, IV and V - 12 inches through 144 inches in diameter. Larger sizes and higher classes are available as special designs. |
| ASTM C118 | Concrete Pipe for Irrigation or Drainage: Covers concrete pipe intended to be used for the conveyance of irrigation water under low hydrostatic heads, generally not exceeding 25 feet, and for use in drainage in sizes from 4 inches through 24 inches in diameter. |
| ASTM C361 | Reinforced Concrete Low-Head Pressure Pipe: Covers reinforced concrete pipe intended to be used for the construction of pressure conduits with low internal hydrostatic heads generally not exceeding 125 feet in sizes from 12 inches through 108 inches in diameter. |
| ASTM C443 | Joints for Circular Concrete Sewer and Culvert Pipe, with Rubber Gaskets: Covers joints where infiltration or exfiltration is a factor in the design, including the design of joints and the requirements for rubber gaskets to be used therewith for pipe conforming in all other respects to ASTM C 14 or ASTM C 76. |
| ASTM C457 | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete. |
| ASTM C478 | Precast Reinforced Concrete Manhole Sections: Covers precast reinforced concrete manhole risers, grade rings and tops to be used to construct manholes for storm and sanitary sewers. |
| ASTM C494 | Standard Specification for Chemical Admixtures for Concrete. |
| ASTM C497 | Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile: Covers procedures for testing concrete pipe and tile. |
| ASTM C655 | Reinforced Concrete D-load Culvert, Storm Drain and Sewer Pipe: Covers acceptance of pipe design and production pipe based upon the D-load concept and statistical sampling techniques for concrete pipe to be used for the conveyance of sewage, industrial waste and storm water and construction of culverts. |
| ASTM C789 | Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers. |
| ASTM C822 | Standard Definitions and Terms Relating to Concrete Pipe and Related Products: Covers words and terms used in concrete pipe standards. |
| ASTM C850 | Specification for Precast reinforced concrete Box Sections for culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings. |
| ASTM C913 | Standard specification for precast concrete water and wastewater structures. |
| ASTM C990 | Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Sealants: Covers joints for precast concrete pipe, box, and other sections using preformed flexible joint sealants for use in storm sewers and culverts which are not intended to operate under internal pressure, or are not subject to infiltration or exfiltration limits. |
| ASTM C924 | Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method: Covers procedures for testing concrete pipe sewer lines when using the low-pressure air test method to demonstrate the integrity of the installed material and construction procedures. |
| ASTM C969 | Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines: Covers procedures for testing installed precast concrete pipe sewer lines using either water infiltration or exfiltration acceptance limits to demonstrate the integrity of the installed materials and construction procedure. |
| ASTM C1103 | Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines: Covers procedures for testing the joints of installed precast concrete pipe sewer lines, when using either air or water under low pressure to demonstrate the integrity of the joint and construction procedure. |
| ASTM C1131 | Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems: Covers procedures for least cost (life cycle) analysis (LCA) of materials, systems, or structures proposed for use in the construction of concrete culvert, storm |
| ASTM C1417 | Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design: Covers the manufacture and acceptance of precast concrete pipe designed to conform to the owner’s design requirements and to ASCE 15-93 (Direct Design Standard) or an equivalent design specification. |
| ASTM C1433 | Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers: Covers single-cell precast reinforced concrete box sections intended to be used for the construction of culverts for the conveyance of storm water and industrial wastes and sewage. |
| ASTM C1479 | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations. |
| ASTM C1610 | Standard Test Method for Static Segregation of SCC Using Column Technique. |
| ASTM C1611 | Standard Test Method for Slump Flow of SCC. |
| ASTM C1621 | Standard Test Method for Passing Ability of SCC by J-Ring. |
| ASTM C1675 | Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers. |
| ASTM C1677 | Standard Specification for Joints for Concrete Box, Using Rubber Gaskets. |
| ASTM C1712 | Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test. |
| ASTM C1758 | Standard Test Method for Fabricating Test Specimens with SCC. |
| ASTM C1818 | Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe. |
| ASTM C1840 | Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe. |
| American Society Of Civil Engineers | |
|---|---|
| ASCE 15 | Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD). |
| ASCE 27 | Standard practice for Direct Design of Precast Concrete Pipe for Jacking in Trenchless Construction. |
| ASCE 28 | Standard Practice for Direct Design of Precast Concrete Box Sections for Jacking in Trenchless Construction. |
| ASCE 36 | Standard design and construction guidelines for Microtunneling. |
| American Water Works Association | |
|---|---|
| AWWA C302 | Reinforced Concrete Pressure Pipe |
Did you find what you needed?
Click on a star to rate this page
Tell us how we can improve this page?
Submit your feedback with your location and organization.
We appreciate your input so we can improve to serve you better.